EQUIPMENT

News

・Working Range: 5 x 10 feet (4 units) / 2 x 4 M (1 unit)

・Working Capacity: Aluminum alloy~6mm, SUS~16mm, SS41~19mm、青銅、紅銅

・Working Range: 5 x 10 feet.

・Applicable workpieces: Round pipe, square pipe, channel steel, I-beam and punched workpiece, etc.

・Working Length: 3M. Max. Force Output: 130 tons (2 units)

・Working Length: 4M. Max. Force Output: 170 tons (1 units)

・Working Length: 4M. Max. Force Output: 230 tons (1 units)

・Working Capacity: Width 1350mm, Thickness 1~19mm.

・Applicable Workplaces: For removing sharp edges and debarring on both sides of stainless steel, scratching and polishing.

・Working Range: Width 4 feet. Length unlimited.

・Working Capacity: SS41~6mm, SUS~3mm.

・Co2 Welding and argon-arc welding for stainless steel, Drilling machine and tapping machine, Stud welding machine and riveting machine, etc.

Raw Steel Plate			Stainless & Galbanized Steel Plate			Aluminum Alloy Steel Plate
Thick.	Cutting Cost/Meter	Round hole cutting cost Dia. under Ø30mm	Thick.	Cutting Cost/Meter	Round hole cutting cost Dia. under Ø30mm	Thick.	Cutting Cost/Meter	Round hole cutting cost Dia. under Ø30mm
1.2T	12	3	1.2T	21.6	5.4	1.2T	36	9
1.6T	16	3	1.5T	27	5.4	1.5T	48	9
2.0T	20	3	2.0T	36	5.4	2.0T	60	8
2.3T	23	3	2.5T	45	5.4	3.0T	90	8
3.0T	30	3	3.0T	54	5.4	4.0T	120	12
4.0T	40	4	4.0T	72	7.2	4.5T	135	13.5
4.5T	45	4.5	4.5T	81	8.1	5.0T	150	15
5.0T	50	5	5.0T	90	9	6.0T	180	18
6.0T	60	6	6.0T	108	10.8	• Aluminum ally material be cut : #5052, #6061 • Aluminum ally material be cut : #5052 • Special material machining cost is available upon request. • Stainless steel, foggy surface(2B) thickness : 0.8mm~3mm • Stainless steel, shiny surface(BA) thickness : 0.8mm~2mm • Stainless steel, shiny surface(HL) thickness : 0.8mm~3mm • Stainless steel, rough surface(No.1) thickness : 4mm~16mm • Hole diameter smaller than 2/3 of plate thickness can't be cut, but perforating can be made.
7.0T	70	7	8.0T	144	14.4
8.0T	80	8	9.0T	162	16.2
9.0T	90	9	10T	210	21
10T	100	10	12T	306	30.6
12T	120	12	16T	600	60
13T	130	13	• Electric galvanized plate thickness, Max. 2mm • Hot dip galvanized plate thickness, Max. 4mm • Cutting cost for round hole dia. over 30mm is calculated by circumference.
16T	160	16
19T	190	19

Thickness	Under 3 mm	4~4.5 mm	5~6 mm	8~10 mm	12 mm
Unit Price	Length	Length	Length	Length	Length
10	1,000	500
15	1,500	1,000	500
20	2,000	1,500
25	2,500	2,000
30	3,000	2,500	800
35		3,000
40
50			1,000	500
60
70
80
100			1,500		500
120
150			2,000	1,000
* Bending cost for extra large plate or complicated shape will be offered separately. * 3D 5-axis Case Cutting : Cutting costs for round tube, square tube, angular steel, I-beam, channel steel and various 3D curved surface are available upon request. * Co2 Welding Cost : Depends on workpiece. * Automatic Corner Sanding Machine : Machining costs for edge sanding and chamfering on single or double surface, or hair graining on stainless steel plate are available upon request. * Discount is allowable for mass production.

Thickness	Under 3 mm	4~6 mm	8~12 mm
Unit Price	Tapping Dia.	Tapping Dia.	Tapping Dia.
5	M3~M6	M5~M6
10	M8~M10	M3~M4, M8~M10	M5~M6
20	M12	M12	M3~M10
50			M12
* Inch thread is not available. * Tapping cost for stainless steel plate over 6mm will be offered separately. * Tapping cost for complicated shape or special material will be offered separately.